Home > Hardware > Stainless Steel Sheets with Vibration non-directional

Stainless Steel Sheets with Vibration non-directional

A vibration non-directional surface is a type of surface finish that is achieved by using a vibratory process to create a uniform and non-directional texture on the surface of stainless steel. This finish is sometimes referred to as "vibration finish", "non-directional finish", or "orbital finish".

Product Description

Stainless steel sheets with Vibration Finish application:

The vibration process involves moving the stainless steel sheet back and forth under a vibration head, which uses a high-frequency oscillation to create a uniform and non-directional texture on the surface of the stainless steel. This process is similar to sandblasting, but the resulting texture is less pronounced and more uniform.
The non-directional surface finish is commonly used in architectural applications, such as wall cladding, elevator interiors, and decorative panels, where a non-directional and uniform appearance is desired. It is also used in industries such as automotive, aerospace, and medical, where a durable and corrosion-resistant surface is required.

Vibration non-directional surface finishes can be applied to various grades of stainless steel, including 304, 316, and 430, and can be used on sheets, plates, and other forms of stainless steel. The resulting surface finish has a low-reflective appearance that is less reflective than a mirror finish but more reflective than a hairline finish. It is typically easy to maintain, with a simple cleaning process that involves wiping the surface with a damp cloth or mild soap solution to remove any dirt or debris.

 

About the size of decorative stainless steel sheets:

Commonly used decorative stainless steel sheets standard size are 4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm or customize, thickness is 0.5mm-3mm. If the thickness of the sheets is not enough, easy to bend, will affect the production of decorative sheets. If the thickness is too large and the steel sheets is too heavy, it will not only increase the cost of the steel sheets, but also bring unnecessary difficulties to the operation. We will recommend more reasonable suggestions based on your application.

 

Stainless steel sheets with Vibration Finish colors:

Using special processing technology for stainless steel decorative sheet surface color plating, commonly used stainless steel color sheet decorative sheet colors are: black, sapphire blue, titanium, brown, bronze, champagne gold, rose gold, purple, green, and can be customized deployment of appropriate color, to meet the owners and architectural designers of architectural decoration atmosphere of various preferences and the pursuit of unique taste.

 

Chemical Composition:

Grade

Chemical Composition (%)

C

Si

Mn

P

S

Ni

Cr

Mo

201

≤0.15

≤1.00

5.5/7.5

≤0.060

≤0.030

3.5/5.5

16.0/18.0

-

304

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

8.0/11.0

18.00/20.00

-

316

≤0.08

≤1.00

≤2.00

≤0.045

≤0.03

10.00/14.00

16.0/18.0

2.00/3.00

316L

≤0.03

≤1.00

≤2.00

≤0.045

≤0.03

10.00/14.00

16.0/18.0

2.00/3.00

 

About the common maintenance skills of stainless steel decorative sheet:

Decorative Stainless steel sheets decorative effect is good, but it is hard to avoid being often touched scratch damage. If maintenance can be carried out in time, it can effectively delay the service life.

1. Stainless steel surface dust and easy to remove dirt, can be cleaned with neutral detergent, such as the use of alcohol or organic solvent scrubbing.

2. Stainless steel surface grease, lubricating oil pollution, clean with a soft cloth, with neutral detergent or special detergent cleaning.

3. Stainless steel surface with bleach and a variety of acids attached, immediately washed with water, with ammonia solution or carbonic acid water immersion, and then wash with neutral detergent or warm water.

4. Stainless steel surface has rainbow lines, is caused by too much use of detergent or oil, washing with warm water or neutral detergent can be washed away, and finally special attention is must not use more sharp or rough objects to wipe the surface of stainless steel, such as clean ball liniment, so it is easy to scratch the surface of stainless steel, affect its beauty.

5. Avoid the use of washing liquid containing bleaching ingredients and abrasive agents, steel wire balls, grinding tools, etc., in order to avoid residual washing liquid, corrosion of stainless steel surface, wash the surface with clean water at the end of washing.

 

Product Name:Stainless Steel Sheet with Vibration Finish 

 

Product Description

Surface Finishing

Vibration Finish 

Grade

201,  304, 316L 

Color

Golden, Rose Golden, Bronze, Rose Red, Wine Red, Blue, purple, Black, Green

Thickness

0.5mm-3.0mm or customized

Width

1000mm, 1219mm or customize

Length

2000mm, 2438mm, 3048mm or customize

Standard size

4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm

Technique

Cold Rolled Stainless Steel

Package

PVC protective film+wooden Pallets with waterproof paper and steel strip or as requirement

Delivery time

15 days after confirming deposit

Payment terms

T/T, L/C

Application 

Building Interior Exterior Decoration, Partition Screen, Door, Elevator, Lift , Wall Decoration, Cover Panel, Table or decorative surface

Standard

AISI, GB,SGS

Origin

BAOXIN, POSCO, TISCO

Note

We can provide other sizes , pattern and color by customers' requirement

Others

We also manufacture tube and pipe, Show Shelf, Handle, Handrail, Door, Elevator Cab, Kitchenware, Sanitary Ware etc. with good looking and different color for your option.

Home Contact us

Sign In

Username :

Password :