Home > Electronic Components & Supplies > Electronics Production Machinery > PG-280P Fully Automated IC Programming Equipment

PG-280P Fully Automated IC Programming Equipment

PG-280P is a mass-produced automated IC programming equipment with high cost performance. PG-280P supports tape-in/out, tube-in/out, IC marking and other functions. The number of programming modules can be 4 or 8. It not only improves the production efficiency, but also eliminates the possible human error in the process of IC programming.

Product Description

PG-280P Fully Automated IC Programming Equipment

 

PG-280P is a mass-produced automated IC programming equipment with high cost performance. PG-280P supports tape-in/out, tube-in/out, IC marking and other functions. The number of programming modules can be 4 or 8. It not only improves the production efficiency, but also eliminates the possible human error in the process of IC programming. The performance of both mechanical system and programming system has reached the very high level.

 

Features

◆ Equipped with high precision CAM mechanism and 4 nozzle, the actual UPH output is 2800.

◆ Motor pressing block system: the speed of pressing block can be adjusted and the action is flexible and fast. The pressing height can be adjusted without overvoltage to improve the life of the SOCKET.

◆ High precision mechanical positioning system (positioning accuracy: ±0.05mm).

◆ PG280P can interact with the customer’s MES system, and the production process can be controlled in real time. It can also be matched with the lightweight CPS system developed by our company.

◆ PG280P can be used with programmers BeeHive204AP *2 or SP16-FX *16 or PD-200-S8 *2 or CTP-S20 *16.

◆ Supported adapter: up to 16.

◆ I/O Devices: Tape, Tube

◆ Supported package: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, SOP, TSOP, TSSOP, SON, BGA, EBGA, VFBGA.

◆ Supported IC size: >2*3mm

 

PG-280P Fully Automated IC Programming Equipment

 

Technical Parameters

 

PG280P Specifications of four-nozzle IC programming machine

Program components

 

Supported programmer

Special programmer, self-made machine

Adapter

Up to 16PCS

Capacity

Nozzle

PPU four-nozzle system

UPH

2800PCS/H

Control system

Transmission

High precision grinding ball screw; ball spline; linear slide rail; cam mechanism

Drive system

Servo drive system

X/Y/Z precision

X:±0.05mm;Y:±0.02mm;Z:±0.05mm; P:±0.05mm U(θ):±0.15 degree

Positioning

Machinery

High precision mechanical double positioning sockets

I/O device

Feeder

Power-driven feeder (8-24MM); YAMAH Air-feeder(8-24MM)

Tube (TB16V)

Tape-in, Tube-in

Tape (TP15)

Tape width (8~32mm); Velum: heat-seal, film adhesive

Marking

Ink marking

Cylinder ink marking  device (ATMK20): dot, number

Laser marking (optional)

Brand laser marking machine

AOI recheck (optional)

AOI recheck (detection content can be uploaded to MES system)

Labeling (optional)

Label Feeder

Control system

Operating system

Windows7/32 bit operating system

Display

19.5 inch LCD display(16:9)

Input device

Keyboard and mouse

PGMES

Standard MES interface (order number, NG/OK number, running status)

One-key setting

Built-in standard template data(One key setting parameters)

Auxiliary function

Report abnormal causes and provide solutions when alerting

Device monitoring

Monitor and respond to device status (warning and adjusting parameters when the reject rate is high).

Status monitoring

CPS platform

Maintenance

Remote service, Debugging; Maintenance reminders, Replacement reminders

Equipment parameters

 

Reject rate

0.3%

Pass-Yield

99.97%

MTBF

210H

Voltage

Single Phase 220~240V, 50-60 Hz

Power

1.5KW(including CP)

Air source

0.5-0.7 MPa, 180--200 l/min

Size (W*D*H)

1450(L) * 720(W) * 1325(H)mm (without the height of the mat 100mm/ alarm light 400mm)

here

Contact Us

Email: info@prosystems.com.cn

Mob.: +86 158 1386 1792

Tel.: +86 755 2788 9099

WeChat: +86 158 1386 1792

Skype: info@prosystems.com.cn

Add.: 6F, Building A, FuNing High-Tech Industry Park, No.71 XinTian Road, FuYong Town, BaoAn District, ShenZhen City, Guangdong Province, China.

Home Contact us

Sign In

Username :

Password :